We are engaged in offering Form Work that can also offer customized form works for our clients as per their requirements. We use high grade raw material in the process to ensure sturdy construction and ability to bear inconsiderable forces generated by wet concrete. These products & accessories can be used on all types of building construction environment, thus meeting the construction based needs arising at clients'' end.
Bajaj Big panel Wall Form is fabricated with a 4mm steel faceplate and built-in stiffeners. Plumbing soldier with catwalk is connected to wall form panel for access and botom jack is used for vertically adjustment. Big Panel Wall Form minimizes panel joints and thus gives a better concretes finishing.
Steel Wall Form system (Conventional Type) is a robust system for casting walls, columns etc
It has an array of components like steel plates, Soldiers, Waler & waler clips, Tie rods etc.
An effecient way of Heavy duty pouring with long heights & large area. It consists of Heavy Duty Soldiers & wallfform system accessories with primary walers.
We offer MS Frame Made from Steel Sections like Angle / Channel on which plywood can bolted.
The frames are acurately made as per sizes & give strength & life to plywood / plastic board & better firnish to concrete surface finish.
System devices for receiving and deflecting loads from concrete pressure, and lift from single-sided formworks.
In case placing panels face to face is not possible and thus Tie rods cannot be used, the concrete pressure has to be withstood by additional external structures.
We have varoius system solutions.
Please contact us fro detail designs & estimation
Circular Form work / Curved Form work / Circular Tank Shuttering
We have system for Circular / Curved shuttering for Circular Tanks or curved structures
Water seal Ties can be supplied along for water retaining Structures.
This is a very simple & fast method for attaining Round casting.
It is a Innovative system for Formwork in self climbing arrangment with achor bolts, tilt up struts, soldiers & brackets.
Bajaj Tunnel Form is a system that allows casting of walls and slabs in one operation on a daily cycle. Construction durations are reduced significantly by this rapid system when compared to conventional methods. Tunnel Form System brings speed, quality and accuracy to concrete construction and provides big savings in finishing.
The system creates efficient load-bearing structures which are known as the most earthquake resistant structures.
Table Form is an innovative system for slab formwork for faster construction of slabs reducing labor of staging / centering with help of tower crane hook attachements & lifting trolley.
We design & manufactur Alumunium Formwork
Using this unique formwork, all walls, floor slabs, columns, beams, stairs, balconies, together with door and window openings are cast in place in a single site based operation. The resulting building structure is very strong, accurate in dimensions and tolerances, with a high quality of finished concrete surface. It is fast, adaptable and very cost effective.
The lightweight panel with an excellent stiffness to weight ratio, yielding minimal deflections under concrete loading. Panels are manufactured in standard sizes with non-standard elements produced to the required size and shape to suit the project requirements
We offer various type of Plastic Form sheets.
These can be used like shuttering ply.
However they have greater advantages like:
* More repetitions (Min 50 Reuses)
* Excellent surface finish (Saves Plastering cost)
* Saves Shuttering oil.
* Better Strength that wooden Ply
* Easily drilled & sawn
* Better protection from labor mismanagement like burning etc.
We offer beam clamps for tightening of Beam shuttering arrangements.
These can be used in wooden as well as steel shuttering.
We bring forth Wing Nut and Anchor Nut, which is acknowledged for their corrosion and abrasion resistance. Highly durable in nature, our products find application in both industrial as well as domestic purposes. Owing to the unmatched quality our products are demanded across the globe. Further, these are available in various specifications and can be customized as required by the clients. Furthermore, we offer these Wing Nut and Anchor Nut at industries leading prices.
We offer clients quality range of Tie Rod and Waller Plate that is used as a tie and in most applications is also capable of carrying tensile loads. Further, our range meets the application requirements in trucks and cars, and we can make them available in both standard and customized specifications. Further, these are widely appreciated for its durability and long service life. Furthermore, we offer these Tie Rod and Waller Plate at industries leading prices.
Avail from us Rapid Clamp and Column Clamp that are used with mild steel rods and provide a cheap, effective clamping system that has no nut or bolt and leaves no expensive ties in the concrete. The concrete, the wedge of the clamp though made from mild steel is also available with heat treatment for long life. Available in various specifications, these Rapid Clamp and Column Clamp can also be customized as detailed by the clients. Further, we offer these Rapid Clamp and Column Clamp at industries best prices.
We are offering a wide variety of tie bar connector that is engineered at par with industrial standards. Available in a variety of technical specifications, our products are highly economical as compared to the other ones offered by our competitors. Further, these are highly appreciated by the professionals in the industry as we offer this Tie Bar Connector & Hex Nut in various specifications and at industries leading prices.
We manufacture shukanja or builder clamps used for holding shuttering for Beams as well as columns.
We offer our clients Water Stopper - With Disc/Without Disc that is designed to meet specific requirement of building industry. It essentially is a device against possible risk of discomfiture that tends to be caused in concrete structure following climatic, Geo-disturbances and frictional impasse. These Water stopper are used in concrete masonry construction of hydraulic structure to safeguard from hydrostatic pressure and water seepage.
Made from various sizes of slotted angle & various sheet thickness like
*40 x 5, 50 x 5, 65 x 5mm Angle
These are used with Wall Form systems & are helpful in heavy duty pouring , Tie Rods & Climbing brackets are used along with the soldiers.
They are available in heights like 1.25M , 2.5M, 3.0M
The basis of the wall formwork is the H 20 timber beam. The H 20 beam is sturdy, easy tohandle and at a weight of only5.0 kg/m offers a high loadbearingcapacity at largedistances of walers.
Due to the project orientated arrangement of beams and tie positions, an optimum adaptation to ground
1.0 Product features
plans and to the demanded
concrete surface will be
The steel walers (clamped onto
the H 20 timber beam)
allow the formwork elements to
be assembled quickly
and simply. The assembly is
done as easily as the
disassembly. The advantage: no
problems with the
restructuring of wall formwork
units when a frequent
change of ground plans takes
The H 20 timber beams are used
We offer steel wailers in C sections.
These are used to hold form work panels / shuttering plates / shuttering ply.
They act as primary beams to used with Tie Rod to hold the form work.
We offer formwork for PQC / Concrete Roads .
The Shuttering panels have provision for Dowels & Have supporting struts to withstand pouring pressure. The system is fast & gives good surface finish.